EN
Search
HDMI Extender Over Coax Single RG6/RG7/RG11 Coaxial Cable Support 1080P up to 500m/1640ft
ModelY1S500M
BrandWiistar
Product TypeHDMI extender
This HDMI Transmitter and Receiver is designed to extend hdmi signal over coaxial cable. With the advantages of good image quality, strong resistance to interference. It can be widely applied in CCTV, outer large screen, shopping mall advertisement, media education and digital KVM fields etc
  • Description
  • Software support
Wiistar HDMI Extender Over Coax Single RG6/RG7/RG11 Coaxial Cable Support 1080P up to 500m/1640ft hdmi transmitter and receiver
Introduction:
This HDMI Transmitter and Receiver is designed to extend hdmi signal over coaxial cable. With the advantages of good image quality, strong resistance to interference. It can be widely applied in CCTV, outer large screen, shopping mall advertisement, media education and digital KVM fields etc
 
Features:
It can transmit HDMI signals up to 1640Ft(500m) using one RG6/7/11 coaxial cable. Solid & shielded coaxial cables, such as Belden 1694A, with metal 75 Ohm BNC connectors are recommended.
 
This system is setup so you can split the signal from 1 transmitter to 1 receiver. It is also easy to built 1 transmitter to multiple receivers for video splitter to get more longer transmission distance.
 
Support HDMI resolution:720p@50/60Hz 1080i@50/60Hz 1080p@50/60Hz.
 
hdcp 1.4.
 
Audio Supports PCM 48KHz.
 
Support HDMI signal loopout from the transmitter; support coaxial loopout from the receiver.
 
No signal loss and delay.
 
Operating Temperature range :-10 to +45℃
 
Storage Temperature range:-20 to +60℃
 
Power Supply: <2.5W;
 
Dimensions (mm): 110(L) x 70(W) x 22(H)
 
Weight:172g(TX),177g(RX)
 
Note:
1.This extender requires transmitter and receiver to work at the same time. One sender can work with several receivers, so you can buy additional receivers according to your needs.
2.The default package is 1*TX+ 1*RX.If you use mode 2 or mode 3,pls purchase repeater(coaxial splitter 1x4) and the extra RX individually.The Repeater(coaxial 1x4) not include.
3.Please reset or plug in and out the power cable of the TX unit(transmitter unit) if there is no audio only picture.
 
There are 3 connection modes for your reference.
 
Mode 1. Point to Point Connection
11


Mode 2. Casecade Mode
12






Mode 3. Point to Multi-points Connection (Note: Splitter does not include in the default package,if you need,please purchase separately.)
13
7896514
 
Picture